Pond Aeration Kits and Compressors

POND PRO CA-150

Thomas 2680CE44

POND PRO CA-65

Thomas 617

HIBLOW HP-20 to HP-80

CA-150 Compressor with dual fittings for high-performance aeration systems.

Aeration Kits and Compressors

pond pro ca-150

The Pond Pro Can-Air oil-less rocking piston compressors are engineered and tested for rigorous, continuous-duty applications.  The CA-Series is one of the most complete compressor line-ups on the market, offering both energy efficient 1/4 and 1/2 HP high and low flow. The size of the compressor fits well into a medium sized, well ventilated pump house near the waters edge. Alternatively it can be installed farther from the pond and use ½” tubing to pump air to the pond.

  • Rocking Piston Compressor 1/2 HP
  • UL/CSA Approved Made in USA
  • Available in 115 or 230 VAC 60 Hz
  • 7.8 CFM at Open Flow, 5.9 CFM at 22′ water depth
  • 50 PSI Max Working Pressure
  • Thermal Overload Protection
  • Compact and Quiet Operation
  • 40 PSI Pressure Relief Valve
  • 4 rubber anti-vibration feet
  • Includes a 6′ power cord
  • 2 Year Warranty
THOMAS 2680CE44 | Aeration kits and compressors

Aeration Kits and Compressors

Thomas 2680CE44

A very dependable air compressor for ponds up to 1 acre where 2-4 diffusers are needed.Runs comfortably at 4.5 CFM. and runs up to 30 psi. A 20’ deep pond uses 9.5 psi so this pump is well suited for our medium sized ponds. For degassing, water clarity or reducing sludge and odors the 2680CE44 is a very strong pump.

  • Head design allows easily replaced piston seal
  • Oil-less, non-lube piston and cylinder
  • Permanently lubricated bearings
  • Stainless steel valves
  • Lightweight die cast aluminum components
  • Long-life, high performance piston seal
  • Thin wall, hard-coated aluminum cylinder for maximum heat transfer
  • Twin fans provide cooling air thru and around motor and cylinders
  • Dual intake/exhaust manifold system for easy piping
  • Balanced for smooth, low vibration operation
  • Field service capability
  • Inlet filter
  • Capacitor
  • All wetted aluminum parts treated for corrosion protection from moisture
  • Patented one piece head for fewer parts and reduced leak paths
  • UL Recognized motor and thermal protector, 115v/60Hz models

Thomas 2680 Kits Available

Kit Includes:  2680 Compressor, 100′ Weighted Tubing, 2 7″ Air Diffusers, Gear Clamps and Manifold

CA-65 Compressor with fittings designed for efficient aeration systems.

Aeration Kits and Compressors

Pond pro CA-65

The Pond Pro Can-Air oil-less rocking piston compressors are engineered and tested for rigorous, continuous-duty applications.  The CA-Series is one of the most complete compressor line-ups on the market, offering both energy efficient 1/4 and 1/2 HP high and low flow The size of the compressor fits well into a small well ventilated pump house near the waters edge. Alternatively it can be installed farther from the pond and use ½” tubing to pump air to the pond.

  • Rocking Piston Compressor 1/4 HP
  • UL/CSA Approved Made in USA
  • Available in 115 or 230 VAC 60 Hz
  • 5.5 CFM at Open Flow, 3.2 CFM at 22′ water depth
  • 50 PSI Max Working Pressure
  • Thermal Overload Protection
  • Compact and Quiet Operation
  • 40 PSI Pressure Relief Valve
  • 4 rubber anti-vibration feet
  • Includes a 6′ power cord
  • 2 Year Warranty

Thomas 2680 Kits Available

Kit Includes:  CA-65 Compressor, 100′ Weighted Tubing, 2 7″ Air Diffusers, Gear Clamps and Manifold

THOMAS 617 | Aeration kits and compressors

Aeration Kits and Compressors

Thomas 617

  • oneOil-less, non-lube piston and cylinder
  • Permanently lubricated bearings
  • Stainless steel valves
  • Lightweight die cast aluminum components
  • Long-life, high performance piston seal
  • Thin wall, hard coated aluminum cylinder for maximum heat transfer
  • Low noise design
  • 115 Volt, UL recognized motor and thermal protector
  • Balanced for smooth, low vibration operation
  • Intake filter
  • Six foot cord and plug assembly
  • Field service capabilit

Thomas 617 aeration compressor is a strong unit producing 1.22 CFM of air for small and medium pond aeration needs. It is capable of running to 50 psi but most of our ponds are 5 to 20’ deep. This means the unit will be idling at 3 to 11 psi lasting for may years of service. Use one lake bottom diffuser in the middle or two 7” air diffusers if the pond is a long rectangle in shape. Backed by an 18 month warranty to protect you better. House in a small pump house that is well ventilated to stay cooler in the summer months.

Thomas 617 Kits Available

Kit Includes:  617 Compressor, 50′ Weighted Tubing, one 7″ Air Diffuser, and Gear Clamps

HIBLOW HP-20 TO HP-80​ | Aeration kits and compressors

Aeration Kits and Compressors

HIBLOW HP-20 to HP-80

Hiblow line of compact compressors are ideal for Koi pumps to larger shallow pond applications requiring higher air flow.

  • HP-20- has 1.1 CFM.  at 2.1 psi (4.4’ depth)
  • HP-40- has 2.8 CFM.  at 2.9 psi (6.1’ depth)
  • HP-60 has 3.5 CFM.   at 3.6 psi (7.5’ depth)
  • HP-80 has 4.2 CFM.   at 3.6 psi (7.5’ depth)

QUESTIONS ON CONFIGURING AN AERATION SYSTEM?

There are a lot of factors to consider when configuring an aeration system. Contact us for help from an expert who will guide you through with questions to determine the right system for your needs.